FermZilla Siphon / Racking Cane cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I’ve come up with way to make starting a siphon from my FermZilla easier and wanted to share in the hope that helpful to
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Note - you may need to modify the model, depending on the diameter of your racking cane/tubing. The hole in this model is 10.5mm dia.
I’ve come up with way to make starting a siphon from my FermZilla easier and wanted to share in the hope that helpful to anyone else using a fermzilla with bottling.
Video demo here: https://files.catbox.moe/4lw53b.mp4
Similar to the “blow to start” siphons people use with carboys.
So I 3D printed two standard PET bottle caps, each with a hole for a racking cane. Both screw directly onto the FermZilla ports.
One cap holds the racking cane → siphon tube → bottling wand.
The other cap has a small tube just for blowing into.
When bottling, place the wand in the bottle, push down to open and give a quick blow into the second tube.. siphon starts instantly.
I've found it super easy compared to previous method which "sucked". minimal oxygen exposure (I think).
Video demo here: https://files.catbox.moe/4lw53b.mp4
Remix of file by 3D Academy