1 / 6
Slim 18650 Fatshark Case with Cell Checker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed dmcke5's excellent 18650 Fatshark case with cell checker with the following goals: Combine bottom and body…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed dmcke5's excellent 18650 Fatshark case with cell checker with the following goals:
- Combine bottom and body into a single piece
- Secure top with M2 screws
- Reduce the need for supports by flattening top and bottom (I prefer to keep the pack in my pocket with an extension cable)
I used redrobrc's taller button in TPU to reduce rattling and make the button easier to find.
Non-Printed Parts
- 1-5S Lipo Battery Voltage Display Indicator Board
- 4x M2 screws. The holes support up to 10mm. I think I used 7mm.
- 3-pin JST-XH connector
- 2.1mm x 5.5mm barrel connector
- Misc wire
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
- Transparent PETG for the body and top
- Transparent TPU for the button
Category: R/C Vehicles