1 / 7
N3MI 4 & 6-port Exhaust Plate for Stealthchanger with 7 segment LED — zdjęcie 1
1 / 7

N3MI 4 & 6-port Exhaust Plate for Stealthchanger with 7 segment LED

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a mod of N3MI's exhaust/umbilical plate that holds a cheap 7-segment LED.

Ocena
0 / 5
Polubienia
12
Pobrania
31
Wydruki
0
Wyświetlenia
476
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Modified N3MI's excellent umbilical plate to work with a 7-segment round LED that's available for $1 or so.

Installs just like the original, but get a 7-bit WS2812 LED from aliExpress.

I used a 3-pin JST-XH connector to make it easier to install and remove if/when needed.  Be sure to write down the pin connections before soldering!

Onshape cad files available!

Changes:  

V1.2  2026/06/24:  Added 6-tool version

TBD: We could probably improve the clear diffuser also to have more diffusion, but I'll leave that for another day.

TBD:  add instructions for control from klipper using LED-effects.

Here's my test config:

[neopixel stealthchanger_led]
pin: PB0
chain_count: 7
initial_RED: 0.2
initial_GREEN: 0
initial_BLUE: 0.2
initial_WHITE: 0
color_order: GRB

[led_effect SC_ready] autostart: false frame_rate: 24 leds: neopixel:stealthchanger_led layers: breathing 3 0 top (0,0,0.2)

[led_effect SC_changing] autostart: false frame_rate: 24 leds: neopixel:stealthchanger_led layers: comet 1 1 top (0.2,0,0)

[led_effect SC_printing] autostart: false frame_rate: 24 leds: neopixel:stealthchanger_led layers: comet 1 1 top (0.2,0,0)

Tagi