1 / 2
RV Fresh Water Bayonet to Garden Hose Adapter — zdjęcie 1
1 / 2

RV Fresh Water Bayonet to Garden Hose Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to convert common RV Bayonet adapter to Garden Hose Female threads.

Ocena
0 / 5
Polubienia
11
Pobrania
65
Wydruki
0
Wyświetlenia
288
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I fill our RV at the campsite with a jug sometimes, so I need a way to hold a short garden hose. I have tried a number of other designs, and while they work, the ones I've tried have a few flaws in my testing; they either don't quite fit right, or have vent-holes which leak, or required a lot of sanding to get them to fit.

This one is a better fit for my use, having an extended spout to go into the filler neck, and a slightly larger diameter to fit better, with little to no post-processing. I included a recess to take a rubber washer with screen, as added protection as I'm filling from a jug at the campground. You can skip the screen and just use a rubber washer, which helps alleviate any leaking issues.

The washers with screens are available from Amazon, or most places that sell garden hose or RV accessories.

https://www.amazon.ca/Camco-20183-X-Hose-Filter-Washer/dp/B003GC74NK

I printed with the large base down, in Polymaker PETG, at .2mm layer height, using GRID supports, over the build-plate only. 

Tagi