1 / 5
Party glasses - 2026
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Celebrate the arrival of the new year 2026 with these party glasses.
- Ocena
- 4,938 / 5
- Polubienia
- 209
- Pobrania
- 1795
- Wydruki
- 16
- Wyświetlenia
- 5191
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 16) (Komentarze: 17)Remiksy (3)Kolekcje (204)Powiązane
3D model of party glasses for celebrating the arrival of the new year 2026.
Printing:
Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color. But of course you can go without color-change as well.
- Use PLA to bend the front part well in hot water.
- Use brim for the temples.
- Custom supports are ready for the revolute joint of the temples and work well for 0,2mm layerheight.
Post processing:
Also see images here https://www.printables.com/model/342945-party-glasses-2023.
- Remove temple brims and clean the edges.
- Bend the front frame a bit using hot water (or heat gun) and coffee saucer. Hot tap water was sufficient in my case.
- Remove small support block from the temples (inside joint).
- Try to insert piece of filament into the holes. The holes may probably need to be enlarged.
- Slide the temples onto the frame and insert the filament.
- Trim the end of the filament.
- Enjoy the party ;)