G36 Picatinny Carry Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Picatinny-native G36 carry handle, no adapters needed
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 276
- Wydruki
- 0
- Wyświetlenia
- 3658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a Picatinny-native G36 carry handle, no adapters needed.
Hardware:
3X 6-32x1.125" Pan head screws for mounting to gun
2X 6-32x0.625" set screws (I cut the head off screws and cut a notch in it for a flat head screwdriver) for aligning the front sections of rail
Update 05/18/2021:
Added a V2
Has slightly longer carry rail section, still same overall length.
L&R are now aligned with strands of filament.
Added built in supports that break away after printing.
Front and back picatinny mounts split to make mounting and dismounting easier.
After printing the left sides, break the mounting tabs off the main sections for removable tabs.