1 / 4
Schiebebrett für Küchengeräte - Drehheber - schneller Platzwechsel — zdjęcie 1
1 / 4

Schiebebrett für Küchengeräte - Drehheber - schneller Platzwechsel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Damit lassen sich z.B. Küchengeräte leicht auf der Arbeitsplatte verschieben und wieder festen Stand erlangen.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
215
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
GNU General Public License v3.0

Ein einfacher Griff, um sich Schiebebretter selbst zu bauen. Gerade für den alten Thermomix eine tolle Hilfe. Da sich die Waage gerne verabschiedet, wenn man das gute Stück über die Arbeitsplatte zieht. 

Ich habe für die Umsetzung noch eine vorhandene PP-Platte genutzt. Ebenso Teile zugekauft. Sollte aber mit den Druckdateien problemlos funktionieren. Als Unterlage (Brett) kann man nutzen, was man mag, solange es stabil und nicht zu dick ist. Ansonsten muss man die Befestigungsschraube entsprechend etwas tiefer ansetzen. Eine U-Scheibe zwischen Heber und Brett ist auch nicht verkehrt. Die Aussparungen am Heber habe ich gemacht um dort PTFE - Teflon einzukleben - 1.5mm stark- Ist aber auf einer normalen Arbeitsplatte nicht notwendig. Ebensowenig wie die zugekauften Teile (Vielleicht mit Ausnahme der Gummipuffer) Obwohl ich denke, dass TPU ebenso geeignet ist.

Füße  - https://www.amazon.de/dp/B088F74KM8 BEISPIEL!

Gleiter - https://www.amazon.de/dp/B089P2GHLM BEISPIEL!

Wir haben seit Jahren schon mehrere “Bretter” im Einsatz und sind sehr glücklich damit.

Da ich nicht weiß, wie ich ein Video einbette, habe ich eines als .zip bei den Dateien untergebracht. Hier sieht man kurz, die Funktion dieser Konstruktion.

Viel Spaß beim Nachbauen

 

A simple handle to build your own sliding boards. A great help, especially for the old Thermomix. Because the scales like to say goodbye when you pull the good piece over the countertop. 

I still used an existing PP board for the implementation. Parts were also bought. But should work with the print files without any problems. You can use whatever you like as a base (board), as long as it is stable and not too thick. Otherwise, you have to set the fastening screw a little lower. Awasher between the lifter and the board is also not wrong. I made the recesses on the jack to glue PTFE - Teflon - 1.5mm thick - but is not necessary on a normal worktop. Just as little as the bought-in parts. (Maybe with the exception of the rubber buffers) Although I think TPU is equally suitable. 

Feet - https://www.amazon.de/dp/B088F74KM8 - EXAMPLE! 

Gliders - https://www.amazon.de/dp/B089P2GHLM - EXAMPLE! 

We have been using several "boards" for years and are very happy with them. 

Since I don't know how to embed a video, I've placed one as a.zip with the files. Here you can briefly see the function of this construction.

Have fun building

 


 

 

Tagi