A1 Mini Compatible Printable Talon Mag

14 rounds crammed onto a tiny print bed! 

Freddy Z's talon mag geometry, with better talon compatibility notches and 45 degree angle printing inspired by the Moxie Mag, and a new chunky endcap bumper rated ready for John Wick style mag flinging action. Freddy Z's talon mag geometry, with better talon compatibility notches and 45 degree angle printing inspired by the Moxie Mag, and a new chunky endcap bumper rated ready for John Wick style mag flinging action, with the main body ready to print right on your A1 mini in 1 piece !

HARDWARE:

1x talon mag spring! Get this from worker / your fav nerf shop / an old talon mag / make one from piano wire ???

2x blaster screws! M2.5 x 5mm Pan Thread plastic screws, you definitely have a box if not buy these ones

OPTIONAL HARDWARE: 

1x slightly longer M2.5 x 10mm blaster screw 

1x 3mm ID 10mm OD washer

these are to hold the follower to the spring –  if you don't have this you dont need it and it will still work fine but be slightly more rattley when unloaded.

PRINTING: 

Main body: PETG (or PLA at your own risk) 0.8mm hotend

Endcap: TPU for that good mag drop bounce, but PETG is also fine, 0.8mm hotend

Follower: PLA is fine for this one, but 0.2mm hotend reccomended as it needs to be smooth to slide in the mag. 

FOLLOWER FROM https://www.printables.com/model/1073300-follower-for-talon-springs-suret-nerf-mod-talon-mahttps://www.printables.com/model/1073300-follower-for-talon-springs-suret-nerf-mod-talon-ma
INSPIRATION FOR PRINT ORIENTATION FROM https://www.printables.com/model/1228312-moxie-mag-20-updatehttps://www.printables.com/model/1228312-moxie-mag-20-update