Goggle Clip for Scott Track Plus skiing helmet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Goggle for Scott Track Plus and Keeper skiing helmets.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 158
- Wydruki
- 1
- Wyświetlenia
- 1370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I have created this clip with FreeCAD because my original clip broke. This clip goes from the outside and back of the helmet through the helmet into the inside. It requires a little counter-clip from the original clip which is stuck through the small square slot of this printer clip and which is supposed to fix the whole clip to stay in place.
My helmet is a Scott Track Plus but it should also work for the Keeper 2 helmets.
I printed mine laying sidewards with 0.2mm, 15% infill and support structures. You should use PETG or ABS for better strength and UV-resistence.