1 / 3
GoWISE USA Air Fryer basket latch — zdjęcie 1
1 / 3

GoWISE USA Air Fryer basket latch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This print replaces a flimsy plastic part that, when broken, prevents your air fryer from turning on.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

My air fryer stopped powering on, even though the basket was properly in place. When I opened it up, I discovered that sliding the basket in actuates a lever, which pushes in a normally-open switch connected to the mains. The part holding the lever has pretty flimsy tab and had broken. So, I designed a replacement. 

You should print this part using a high-temperature tolerant filament like ABS, ASA, or nylon. However, I'm not sure how hot it gets inside this cavity.


If you found this useful: