1 / 3
Toilet Paper Roll Retainer / End Cap - For IKEA Suction Cup Holder — zdjęcie 1
1 / 3

Toilet Paper Roll Retainer / End Cap - For IKEA Suction Cup Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This thing prevents the toilet paper roll from falling off the holder when pulling at an angle or rolling up

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
157
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Since my son wants to use the toilet as well, the paper roll spent most time lying on the floor. 

Trying to grab a sheet or revving up what he pulled off often led to the paper roll jumping the small lip of the toilet paper holder. 
 

Printing Instructions:

I used TPU at probably 15% infill. You might want to go to 17 or 18%, depending on the softness of your TPU.

PLA and PETG can also work, but maybe trim the snappy hooks a bit to get it on without breaking. 
I did trim them for this version after a previous version broke, and before printing in TPU, so it might already be good. Try first and then decide.

If you feel the need for editing the model, you can find it in Onshape: https://cad.onshape.com/documents/0e2c1c6017de18d64d61159f/w/36d5c0649848d18eb08461e4/e/a036a138316ee1394fb777be

 

Tagi