Lasermatic MK2 Shipping Brace Handle Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to utilize the shipping brace as a handle for the MK2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket to utilize the shipping brace as a handle for the Roly Lasermatic MK2. It uses existing factory mounting locations, but with slightly longer M3/M4 screws. I did have the drill two holes in the acrylic for the lower/inner screw on each bracket. Each aluminum block that secures the pass through panel is drilled and tapped for two screws, but on mine for some reason, the acrylic panel is only drilled to utilize the top holes. I used the bracket as a guide for drilling the holes.
I printed in PLA with 6 walls and 60% infill, and it seems sturdy enough.