Bag & Backpack Hanger for Closet Rod (Clothes / Coat Hanger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong support to hang bags and other looped items on a clothes rod.
- Ocena
- 4,667 / 5
- Polubienia
- 35
- Pobrania
- 182
- Wydruki
- 2
- Wyświetlenia
- 474
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a simple component to hang bags and items on a supporting rod with a couple of goals - prints on its side for strength, no support required, hangs level when loaded, doesn't hang too low from the bar, and looks uncluttered.
I initially had a much thinner walls. I made the final design thicker for strength with PLA and other materials. Adjust the number of wall and infill according to your needs. As these hooks go up in size they also go up in thickness, in order to support heavier bags.
I’ve printed these in PLA and PETG-CF. I'm pleasantly surprised by the strength and stability.
Fits on a rod up to 37mm in diameter.