Skull Spindown d20 for TTRPG and TCG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternative spinning d20 or spindown die, perfect for TTRPG and TCG. The spindown mechanism measures 10.33cm x 2.62cm
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary
An alternative spinning d20 or spindown die, perfect for TTRPG and TCG. The spindown mechanism measures 10.33cm x 2.62cm and is easily portable. A fully print-in-place project with no assembly required! Medieval (emphasis on evil) styled coin with fantasy elements.
Lesson Plan
This spindown was designed for a “makercoin” assignment in my High School’s Advanced Engineering and Design class. The aim of the project was to create a personalized coin which both showcased the CAD skills which we have learned over the past years, and to integrate moving features. My approach was to create a functional d20 with inspiration from fantasy and medieval style coins and the game Magic:The Gathering. Over the course of several weeks, I sketched blueprints, cadded the coin, and made both structural and aesthetic redesigns.
Assembly Instructions
The spinner is fully print-in-place!
Design Choices
1.Changing the Bottom from Filled to Hollow
Initially, the design of the coin used a filled-bottom design (1a). With the original design, the only way to configure the two pieces in place would be to snap the top piece into the hole of the bottom dish piece. Snapping the two pieces into place would likely not be possible or would have required an overly complicated design, so I decided to add a hole to the bottom of the dish and extend the top part downward (1b). The top piece was then able to be printed inside the dish, bypassing difficulties with snapping it in place. This change also removed all assembly requirements!
2.Removing The Connection on the Number Hole
Originally, my design used an extruded cut into the top piece which was just nearly large enough to see the numbers below (2a). This design left a thin piece of material which would have been prone to snapping. To increase the stability of the project, I decided to cut off the thin material there (2b).
3.Aesthetic Change: Indents to Claws
The original decorations along the edge of the coin were circular beads and rectangular indents (3a, 3b). On paper, this pattern seemed cool, but as I cadded it out it appeared plain and boring. I eventually settled on a dragon claw looking design which I had seen online. I first created one claw with the sweep, loft, and cone features, and I used a circular pattern to copy it and another slope design around the radius of the coin (3c, 3d). It took a particularly long time to design the claw in a way which looked semi realistic, it proved to be a creative challenge for me.
4.Structural Fillets
Initially, the inside of the coin had some sharp angular edges (4a). Angles seen in Design Change picture 4a would have been way too sharp and would have failed after moderate stress. In order to increase project durability, I added some internal fillets (4b). The fillets should result in a much more durable product which can last for longer.
