Defensive Spider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was asked by a friend to create this for her and this is one of the models I came up with.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
READ BEFORE REMOVING SUPPORTS:
This little spider was a challenge to create the right supports for it. Use the manual supports I put in for best results. I experimented with multiple versions to find the best results. You will need a pair of clippers to clip the supports from the legs before you try to remove them. You should clip the support trees in multiple spots and remove them gently when working around the legs because if you pull too hard, they will break on you. Once you get the largest sections removed, hold the leg in one hand and use your finger to push and bend the last small bit of support on the leg away from it. This does require patience, but is very doable. Spiders certainly pose a challenge for 3d printers and this one is no exception.
He might be fun for your decor, dioramas, and games. Have fun !