Neptune 4 Max 35015 Printhead cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a remix. I tried to reduce the weight, tilt the front fan, and add more LEDs
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the fan fittings on the PapaSchlumpf design, but the front fan is still the loudest fan on the printer. I remixed it a couple times to tilt the fan out more.
The stock LED on the head is super dim, so I removed the mount and added 3 mounts for round 24v LEDs.
It's difficult to print cleanly after I modified it so much. I added a little material on the back to level it for easier printing. I'll try to have it resin printed instead to see if that has smoother airflow paths.
I'm using 3 of these white LEDs: https://www.amazon.com/PATIKIL-Lights-Light-Emitting-Indicator-Lighting/dp/B0D8GMYVQN/ref=ast_sto_dp_puis?th=1