Boat cleat for sand molding Aluminum/Bronze
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print is designed for easy sand molding a boat cleat. designed for 2 1/4 bolt spacing, and 5/16 bolts.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 265
- Wydruki
- 0
- Wyświetlenia
- 1378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This print works very well for sand casting just be careful around the bottom of the feet when removing the mold, they are the only vertical surface on the part. I recommend sanding and painting the parts before using them, the smoother the surface finish the better. I use 130 mesh petrabond for my sand.
You will also need a drill press or hand drill with drill bits suited to metal. I designed the cleats for 5/16" bolts but 3/8" should also work without a problem. To drill simply find the center and measure 1 1/8" out to each side.
The photos are of my first attempt before I sanded and painted the molds.