6.5 inch Rack Shelf Drawers

this shelf cannot put into RackMate TT

• Click to Read About 6.5 inch and Rack Frame
• 6.5 inch Rack Mount Collection
• you need to print 1-3 to use as drawers 4-5 is optional
  1. rack shelf (rack mount)
  2. rack shelf backplate
  3. drawer
  4. drawer insert
  5. rack shelf top
• backplate
  • print separate from rack shelf so you can turn to normal network shelf if you decide not to use drawers
  • Back Cover Cable Pass Thought no need to flip side to print and can print without support (have some spaghetti), you can grab and print cover from 10 inch Blank Plate Mod Cable Pass Through if you want to cover 2 cable hole later
• drawer insert
  • can use gridfinity 3x3x4 if you already have one but i think it to thick and take to much space, so i make it my self check in Drawers insert folder
  • my insert is perfect fit with drawers but some gridfinity tray maybe too tight once insert it hard or impossible to remove from drawers
• rack shelf top
  • require M3*(2-4.6mm) screws (spare HDD SSD mounting screws mostly come with motherboard) 
• if you put much heavy stuff or stack drawer rack and you use 3D printable rack by @Mauker you can print Support Rack in 3D printable rack - 10 inch Support Beam for Printable Skadis Mount

My print settings

• rack shelf
  • layer height: 0.2 
  • wall: 3
  • infill: 15%
• rack shelf backplate, drawers, insert
  • same as above but wall 2

If you enjoy my work, please consider support at link in profile.