VESA Mount for monitor arms (75mm and 100mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA mount to adapt in those monitor arms connectors that slide in and have a screw on top.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
The original design was super useful, slided in in the arm connector very easily. Although, it was only for 100mm VESA mount and I needed not only 75mm but also a slimmer version so the VESA mount would't be seen below the monitor.
With this desgin, I've created 2 options, the first one with both 100mm and 75mm holes and a second one, smaller with 75mm holes, only.
Printed in PLA because I was using a very light portable monitor, but I do recommend a stronger filament.
Thank you for the original author for designing this mount.
