Box for HS-type crimping tool (also sold as Klein Tools 3005CR)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple sliding-lid tool box for an HS-type crimping tool with 3 sets of dies (one in the tool, two more in the box).
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 777
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple sliding-lid tool box for an HS-type crimping tool with 3 sets of dies: One in the tool, two more in the box. The crimping tool is sold under different names, such as HS-03B, HS-05D, HS-30J or Klein Tools 3005CR.
The lids is held closed by a long-lasting clip mechanism. The design is not overly complicated, but it holds everything nicely in place. The main goal of this box was to be printable on a regular 230x230 mm bed, as found on the Ender 3 (Pro) and similar common printers.
To store additional crimp dies, this box might be helpful.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.24 mm
Infill:
25%
Filament: Generic PLA black
Notes:
Line width 0.42 mm. 4 top and bottom layers @ 0.24 mm layer height (3 layers work, but result in 1 layer of infill in the box and lid). I recommend the "Grid" infill pattern for this design.