Ender 3 Pro Y axis belt tensioner (lower profile, no collision)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed lower profile Y-axis tensioner for Ender 3 Pro with full 235 mm movement range on the Y axis / bed.
- Ocena
- 4,864 / 5
- Polubienia
- 173
- Pobrania
- 914
- Wydruki
- 27
- Wyświetlenia
- 5102
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on https://www.thingiverse.com/thing:3289057 by Cornely_Cool, with only one modification: The top section towards the bed is cut away smoothly, to allow for the full 235 mm movement range on the Y axis / bed. Only works with the newer Ender 3 Pro's with screw-in Y tensioner brackets (without T-nuts).
For all other parts of the tensioner, please see the original thing. Thanks to Cornely_Cool for his excellent original design.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.12 mm
Infill:
25%
Filament: Generic PLA
Recommended settings:
- Line width 0.42 mm
- 3 wall lines
- Local infill 100% for everything more than 33.5 mm above the build plate