1 / 5
Skadis Slot Connector for attaching fixtures to panels — zdjęcie 1
1 / 5

Skadis Slot Connector for attaching fixtures to panels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skadis Slot Connector for attaching items to panels. Simplifies accessory design & print by using mounting holes.

Ocena
0 / 5
Polubienia
14
Pobrania
73
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

These connectors attach to a Skadis accessory using simple mounting holes.

I chose this approach for slot connections as it offers a number of advantages:

  • It makes accessory design simpler - in most cases, accessories can be printed without supports.
  • Bolt on connections are stronger. Printed slot connections can more easily snap off.
  • Differing panel dimensions (e.g. thicknesses) across different brands can be accommodated with different connectors.
  • The connector can be optimized for the Skadis slot. The connector has a rounded bottom to reliably position it at the bottom of the slot. 
  • No wrenching needed once attached to your accessory. Unlike other approaches that require you to screw it on to your panel, these connectors simply slide into the slot. You can easily change the position of your accessory tool-free.
  • Accessories can be used in other systems, including wall mount, slatwall.

Accessory Mounting Holes - supports M2.5 mounting holes. Design your fixtures/accessories for a resulting printed hole size of 2.80-3.25 mm. I design with a diameter of 3.10 mm. 

Installation 

Use M2.5 x 4.0+ threaded insert / embedment nut. Preferred shank diameter of 3.0-3.2 mm. I use the Hapric Threaded Inserts, Amazon ASIN B0DGPL6RWT, having a shank diameter of 3.15 mm. 

Install theaded insert flush to slightly below flush on the panel face side. 

Bolt onto your accessory with e.g. M2.5 Buttonhead machine screw and lock washer. Ensure the connector is aligned vertically.

 

Print Recommendations - 25%+ infill, 4 wall loops. Orient part on plate with the hole vertical. No supports needed. 

Panel thicknesses can vary by brand and material. Contact me if you have a fitment issue.

See other Skadis accessories at  https://www.printables.com/@HighDesertHacker/collections/2753488

If it works for you, please Like and post a Make with photo for others to see.

Tagi