1 / 3
Minimalist Fluxx card replacement box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PLA foldable box to replace the existing cardboard one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Print Instructions:
- Infill doesn't matter
- No Supports
- 0.1 Layer Height
- Filament: PLA
- If you use translucent filament you can read the rule card through the bottom of the box, but you'll also see the Fluxx logo peak through at the top as well.
Quick and easy print. My recommendation is to fold along the creases while it's still warm immediately after the print finishes. It becomes a little more brittle if you try to fold it after it cools down.
It's a surprisingly reasonable box for testing the limits of PLA, but it's certainly not heavy duty enough to withstand a dog that likes to chew or a toddler who likes to rip things apart.
I will upload more variants as I create them.
If you'd like to remix here's the OnShape link