Wrench for Delta/Jacuzzi faucet bonnet nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to replace the cartridges in my Jacuzzi whirlpool tub. The part kit I ordered included a wrench to remove the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to replace the cartridges in my Jacuzzi whirlpool tub. The part kit I ordered included a wrench to remove the bonnet nut but it was worse than useless. After much modification I got it to work but I wasn't confident that I'd snugged the bonnet nut properly.
The bonnet nut part number is RP6060 https://www.amazon.com/DELTA-FAUCET-RP6060-Faucet-Chrome/dp/B000VYBL1W/
This wrench fits the nut and is the right size to get into the tight space between the nut and the housing. The PLA+ print seems to be strong enough to torque down the nut but I haven't used it to remove a nut from a faucet that hasn't been disassembled for years.
EDIT: I printed one of these using Siraya Tech Blu resin. The resulting part seems way tougher than the PLA+ version.
https://www.amazon.com/Siraya-Tech-Toughness-Resolution-UV-Curing/dp/B0D95KDJCK/?th=1
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Resolution:
0.2mm
Infill:
50%
Filament: Inland Tough PLA White Category: Bathroom