Toyota Tundra bed with tonneau drain port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tundra with a drain port for a tonneau cover.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Toyota Tundra bed plug modified to fit a ½ inch drain tube. at a slight angle toward the cover. This is to protect both the tube and plugs, but also makes the use of the bed easier since it keeps the drain tubes out of the way.
Print the plug with organic/tree supports everywhere. Print with PETG or similar. The ports can be brittle to install. but have held up well for me once installed. Warm your tubing up to make fitting onto the ports easier. Printed and installed prototypes in PLA so it is possible but not recommended.
With a Retrax Tonneau cover you can use the matching drain plug.
The ½" ID tubing I used is here.