2023 Polaris Matryx Air Intake Snow Deflector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Deflect snow coming up over the hood away from the air intake.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Custom prototype to change the snow coming up over the hood and away from the air intake on a Polaris Matryx sled. Designed to use the existing port in the hood. Remove the rubber plug and replace with the main plug with the backplate. Then use the deflector. This was designed to be modular to easily change and replace the deflector if it breaks or to test new designs.
You'll need m3 x 4 threaded inserts and matching m3 x 6 screws and flat washers. Heat press the threads into either side of the main plug and then secure it to the hood with the backplate. Since this is a prototype, it might require some trimming and adjustments. Let me know the feedback and I'll make the changes to the design. The deflector itself then fits snuggly on the plate and held in place with the m3 screw.
Print with organic supports on the deflector. Snug Supports for the main plug. Tested with PLA for prototyping and PETG. Obviously PETG and other cold tolerant plastics would be best.
Please remix or make suggestions on improving the design!