Detachable Lowboy (Mark 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detachable RC Lowboy Trailer
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
11-15-25 Working on updates to have the detach work better and be able to hold the weight better as well for the Dozer.
I was finally able to make a working detachable lowboy. Had to take some inspiration from the really one to get it to work. I also made the tail lights still work with it. Same concept as the hitch for power to the Trailer. Recommend greasing the slides to help a bit. I also ran into the n20 motor having a problem with torque. 100RPM is slow but has plenty to pull the trailer up. 1000 RPM not all the time but can do it. Going to be testing a 600RPM when it comes in. Wiring is all the same as the other trailers of Professorboots. I still have some bugs to work out with it but it is fully working. After getting to print (Mark 1) found that was not the case with that one. The trailer is all hands free just light the other ones. For unhitching the trailer just have to lower it like you were going to detach. So you can get back under it hands free. The Hitch slide is also not needed so if you have a problem connecting back up just pull that part off and it should work. Lets it flex more without it. Hope you enjoy Let me know what I should try and work on fixing with it if there is more problems. Thank you
-Tail light connectors. Cut magnets and tab off not wanted on it. Middle used as ground for both lights and the sides for left and right lights/