magnetic drone race track planner with filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by other similar models, but I added filament holders to see the path in 3D
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by other similar track planners, but I modelled a filament holder for TPU. This way the track layout is more clear, and you can stack the gates using magnets.
Print in PLA, use 2x6mm neodymium magnets, maybe use a vice or pliers to get them in. If the magnet holes has sagging because its an overhang, use a knife to just make it smooth so the magnet fits in.
Just make sure all the magnets point in the same direction (when standing upright) so that different pieces stick correctly. The one magnet underneath the arch of the stackable gate should be the opposite of all others, this way the filament holder can stick upside down if you need it to.