1 / 2
Artillery Sidewinder X2 LGX Mosquito Probe Mount(Old Bontech X1 adapter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the probe to be moved over with minimal changes to the printer. No firmware update is required but you will…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 1350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Allows the probe to be moved over with minimal changes to the printer. No firmware update is required but you will need to change your esteps and lower you vrefs. My vrefs were set to 1.0 and I have them at set to .7 but Id do .8 because I occasionally miss steps if there is a lot of extrusion force.
Simply reset your zero height and run a mesh level and don't forget to save to eprom!
Category: 3D Printer Parts