Wind vane Pumpkin Cat - 608 Bearing Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind vane remix modified for 608 bearings instead of 625. Shaft and holders adjusted to fit larger bearings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the original Wind vane Pumpkin Cat, modified to use 608 bearings instead of 625 bearings.
Modifications made:
- Shaft enlarged to 9mm diameter for use with M8 bolt
- Pumpkin holder modified: thickness increased to 25mm to fit 608 bearing
- Cat holder modified: thickness increased to 25mm to fit 608 bearing
- Bearing openings adjusted for 608 bearings (22mm outer diameter, 8mm inner diameter)
Hardware needed:
- 2x 608 bearings
- 1x M8 bolt (90mm or 100mm length recommended)
- M8 nut
All four files have been modified to be compatible with 608 bearings.
Differences compared to original: Changed from 625 bearings to 608 bearings due to availability. Modified shaft diameter and holder thickness to accommodate the larger 608 bearings while maintaining the original design functionality.
Thinkercad : https://www.tinkercad.com/things/1Lrey0bI55h-cat-wind-vane-608-bearing-modification