Modular Gunpla Mech Hanger Diorama
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Expand this diorama with floors, corners, and walls, as large as you'd like.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 96
- Wydruki
- 2
- Wyświetlenia
- 830
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Build as big a hanger as you like! The walls, floor, and base connectors all lock into place with the push fit bowties. I'd suggest slicing out just a hole and printing a connector to make sure your sizing works.
There is a top and bottom to the walls only because I didn't align the holes in the middle for the side to side connectors, so once you've set one wall, you'll have to follow the same orientation.
It goes hanger floor, base connector, wall. Each base connector fits two walls side by side, and if you want to add corners, you'll need the corner base and the corner piece. The corner base is the same height as the base connector, so that the corners can be the same height as the walls.
The design shouldn't need glue, but it will help keep things together once you've decided on an arrangement.
The holes in the hanger floor at 7mm, to fit the base pegs of the MG Action Bases. My other upload for Multiconnect Wall Mounts has pegs for 5mm stands so you can use other kinds of Action Base stands as well.
Everything can print without supports.