1 / 2
Sunroof MMU upgrade for the 3D SETS Models 7 (Buggy) - v1.a — zdjęcie 1
1 / 2

Sunroof MMU upgrade for the 3D SETS Models 7 (Buggy) - v1.a

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Closed sunroof for 3D SETS Models 7 (Buggy)

Ocena
5 / 5
Polubienia
7
Pobrania
45
Wydruki
0
Wyświetlenia
198
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Warning

A multi-color management tool is required.

The yellow parts are not included. You must purchase the 3D SETS model 7.

The configuration in the slicer must allow the added elements to be printed in place of the original object for better print quality and solidity of the object; see the explanatory video in the ZIP file.

Definition

None

Printing

A printer of the same size as the one defined by 3D SETS is required. 

Use the same settings as 3D SETS for the same parts. 

A MMU/multi-color management tool.

The configuration in the slicer must allow the added elements to be printed in place of the original object for better print quality and solidity of the object; see the explanatory video in the ZIP file.

  • Method with Prusaslicer (example): 
    • Copy the different STL files into the same directory (the original 3D SETS files and those from this upgrade) 
    • Start Prusaslicer 
    • Add parts, making sure to select all the necessary parts (for example, the body front and the sunroof for the body front) 
    • Confirm that you consider these files as one object with multiple parts 
    • Place the object correctly on the bed In the right panel, by ordering the parts using drag and drop; so that the original 3D SETS parts should be at the top of the list and those from this upgrade are at the bottom 
    • Select your colors 
    • Slice 
    • Check the result by using the slider for the different print layers 
    • If it's OK, then print

Build

Use the 3D SETS build guide. 

Feedback

It is welcome.

Remark

None

Version

v1/v20251021

v1.a/v20251023 : solving bug with the front body sunroof (misplaced)

Tagi