4 mm Electrode for Electrochemcial Measurement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4 mm diameter disk electrode intended to be printed with ProtoPasta conductive PLA and PLA.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
A 4 mm diameter disk electrode intended to be printed in ProtoPasta Conductive PLA and normal PLA to produce a low-cost electrode for electrochemical measurements. This electrode has been demonstrated for the measurement of dissolved oxygen (DO) and pH in aqueous solutions and environmental samples.
This print requires a dual-extrusion or tool-changer 3D printer, and has been successfully printed on the E3D Tool-changer, Ultimaker S5, and BambuLab H2D. Single nozzle multi material printers such as the BambuLab X1C struggle to print this well, as the ProtoPasta conductive is hard to purge from the hot end due to the amount of carbon black it contains.
After printing an M3 x 25 mm screw should be screwed into the back, to be used as an electrical connection.
Used in:
Designed by: Vanessa Klobukoski