1 / 3
Sealing bung for Filament Dry box cheap and simple pneumatic connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using pneumatic connectors is a great idea, but when you connect to your printer the lower is left open, this seals it
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is as simple as it gets, install an M2x4x3.2 heat insert into the open hole.
Then cut a length of pneumatic pipe to size with your M2, hex socket cap machine screw. It should be cut to expose just a few mm of threads exposed.
Screw together as per the pictures and there you have it. It creates an adequate seal while the dry box is in use.
