Dungeon Meshi: Laios Touden meets Dullahan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Art from Dungeon Meshi manga.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.48x200mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.16mm
#020606 PLA Elegoo Black Transmission Distance: 0.3
#28343c PLA Panchroma Ash Gray Mate Transmission Distance: 0.1
#636964 PLA Anycubic Gray Transmission Distance: 1.2
#dedede PLA Elegoo White Transmission Distance: 4.3
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ash Gray Mate
At layer #11 (0.96mm) swap to Gray
At layer #22 (1.84mm) swap to White for the rest.