1 / 3
Skadis Panel Standoffs - 27.5 mm distance. For support and clearance of the back of a panel. — zdjęcie 1
1 / 3

Skadis Panel Standoffs - 27.5 mm distance. For support and clearance of the back of a panel.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach to the back of a Skadis panel to provide support and clearance from the wall. Size 27.5 mm to panel face.

Ocena
0 / 5
Polubienia
5
Pobrania
36
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

Standoffs for Skadis panels. Use with my panels, Ikea, or 3rd party panels. 

These standoffs set the panel face at 27.5 mm from the wall. 

Features a recessed bottom if you want to attach a 10 mm diameter felt pad. Example pads include Amazon ASINs B07CPNT8GZ, B000VYN7CS 

Standoffs are posted in paired lengths. 1 - shorter version is for mounting on a panel connector. 2 - a longer version mounted directly on a panel mounting hole. This one requires an M3 threaded insert installed in the top (narrow end). 

Standoffs: https://www.printables.com/@HighDesertHacker/collections/2757417

Panel connectors: https://www.printables.com/@HighDesertHacker/collections/2757419 

Installation - uses one M3 x 10+ mm e.g. button head socket cap screw. 

Print Recommendations - 15%+ infill. Orient part with narrow diameter on the base plate. Supports not required. 

Find the entire collection of Skadis models at https://www.printables.com/@HighDesertHacker/collections/2753369 

If it works for you, please Like and post a Make with photo for others to see.

Tagi