1 / 2
Skadis Holder (2mm T-Nut) for ipega PG-9028 joy pad
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It does what is says in the title, I used 2mm T-Nuts to affix it to the Skadis board.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Print with it's back side on your build plate out of pretty much anything you like.. I used PLA
You will also need 2 2mm T-Nuts, I used the heat insert remix by Ofilant, but any version that uses M2 threaded screws will do.
Then fix it to your Skadis board. The gamepad balances on top
