Skadis Panel - 240 mm W x 160 mm T. Can be combined to create larger panel areas.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis Panel 240 mm W x 160 mm T. Tongue & groove sides to join seamlessly and create larger panel areas.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Skadis compatible panel. Dimensions: 240 mm Wide x 160 mm High x 5 mm Thick. See other panels at https://www.printables.com/@HighDesertHacker/collections/2757420
Key features:
Panels can be joined together to create a larger area, maintaining a consistent slot pattern so that accessories can connect across panels.
Unique Tongue & Groove design ensures a flush front panel face across panels, and joins panels cleanly, minimizing seam.
Panel connectors are provided to securely hold panels together.
Panel mounting holes at each corner free up Skadis slots for accessories.
Printing your own Skadis compatible panels allows you a broader range of colors and sizes for your installation. This is helpful when your installation doesn't match well with the stock panel sizes. In my case, I had an 11 inch tall x 12 ft wide area above a workbench and below cabinetry. Joining a 240x160 and 240x120 mm panels together vertically in each column made for a perfect fit.
Installation
Use panel connectors to join panels together. Refer to https://www.printables.com/@HighDesertHacker/collections/2757419
Use standoffs on the back of panels and/or connectors to set the panel off the wall. Refer to https://www.printables.com/@HighDesertHacker/collections/2757417
All panel connections use M3 x 10 buttonhead socket cap screws.
Refer to the photos for assembly.
There are 2 tongue sides and 2 groove sides in each panel. Orient them consistently for assembly. I orient the tongue on the top and right sides.
Mounting Methods: Wall, header strip, track mount.
I did a track mount install with t-nuts (https://www.printables.com/model/1446274-m3-t-nut-for-aluminum-34-t-track-075) and bushings (https://www.printables.com/model/1459859-bushing-m3-160-mm-od-x-130-mm-l). This allows the track to be securely attached to the wall studs, with panels at any position along the track.
Print Recommendations - PLA or PETG. I use PLA due to a wider range of color choices. 15%+ infill, Infill Type Gyroid, 4 wall loops. It is recommended you turn off supports to allow the tongue and groove to be printed without supports.
See other Skadis items at https://www.printables.com/@HighDesertHacker/collections/2753369
If it works for you, please Like and post a Make with photo for others to see.