Logitech MX Ergo 40° Stand with Dongle and Cleaning Stick storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
03.11.2018 Added Version 2 STL with additional Storage room for a 34mm ball. I did not test print this one! consider…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 286
- Wydruki
- 5
- Wyświetlenia
- 1846
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
03.11.2018
AddedVersion 2 STL with additional Storage room for a 34mm ball.
*I did not test print this one! consider it a WIP
- In V2 i did add a 36mm wide recess to allow the replacement ball to fit in.
- Also moved the placement of the old recesses and for the magnets a little.
So if you do print it and it works leave a comment please, also, any feedback is appriciated, thanks!
12.08.2018
####Description
Simple Remix based on Logitech MX Ergo 40° Stand by darknao and logitech MX Ergo dongle and cleaning stick storage" by adcurtin.
It somewhat combines both into one ^^ .
I used TinkerCad to mash them together, thanks go to darknao and adcurtin for creating those Things in the first place!
Oh yea, i almost forgot, i added four 5mm square holes to the bottom for magnets of equal size.
If you want to add or mount onto a Metal Plate as a Base instead of cloth or furniture glides.
Hope you guys find this as usefull as i do!
Cheers!
Print Settings
Printer Brand:
Creality
Printer:
Ender 2
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.2
Infill:
20% (thats what i have used)
Notes:
My settings for PLA are:
Layer Height: 0.2
Retraction: 4mm
Extrusion Mult.: 1,05
Outline Top/Bottom Layers: 3
Infill: 20% (you can change this as you desire)
Extruder Temp: 1st Layer 205° 2nd Layer 195°
Heated Bed: 60° (my Filament wouldn´t stick with a lower Temp.)
Print Speed: 60mm/s
Category: Computer