Milanese Keychain Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milanese Style Strap that can be used as a Keychain. But was mainly created to experiment
- Ocena
- 5 / 5
- Polubienia
- 219
- Pobrania
- 802
- Wydruki
- 1
- Wyświetlenia
- 3671
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just like real Milanese bracelets, this design uses interwoven spirals that are connected at the ends to create a flexible joint.
For my first try, I printed it with a brim because I was worried the small attachment points wouldn’t provide enough bed adhesion. In hindsight, I wouldn’t recommend it. It’s a pain to remove afterward. Instead, just make sure your print bed is really clean and that the material adheres well.
I used PLA with a 0.2 mm layer height, and it printed in about 2 hours.
It’s fun to play around with and inspect, though I’m not sure it has any real practical use.