1 / 3
TPU Gasket for the Flowbee Suck Kut by 3D_DYI — zdjęcie 1
1 / 3

TPU Gasket for the Flowbee Suck Kut by 3D_DYI

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A TPU gasket to both hold your trimmer and focus the air flow to the front

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
72
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

After using the Flowbee Suck Kut by 3D_DIY twice without this and fiddling with a cut in half soft case as a wedge I made this. Simple enough, does its job in focusing the sucking power at the right end, possibly a little too well 🤣 It also holds the trimmer really well in place of course. I have the Philips HC9450 trimmer but it should be compatible with most trimmers that fit the Suck Kut. Made with the original Flowbee Suck Kut by 3D_DIY as a negative body.

Tagi