1 / 2
Motor Visualizers Mini - for Dia 5mm by 8mm long magnets — zdjęcie 1
1 / 2

Motor Visualizers Mini - for Dia 5mm by 8mm long magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,38 € – 0,46 € netto (bez VAT)

Dla pliku: X+Z+Extruder Motor visualizers_0.15mm_PLA_MINI_32m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,42 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
31,8 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Remix of another motor visualizer for magnets I had. Fits cylindrical magnets with 5mm diameter and 8mm length.

Ocena
0 / 5
Polubienia
10
Pobrania
49
Wydruki
0
Wyświetlenia
380
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I really liked the design of CollinsDesigns Motor visualizer, but did not have the correct magnets. So I designed my own version for cylindrical magnets with 8mm length and 5mm diameter. My version also has 6 arms, because why not.

There are multiple .stls attached, each for a different motor.
There is one with 35mm diameter for the x-axis. Extruder and z-Axis have both 40mm diameter, as expecially for the extruder you can hardly see it from the front otherwise. The z-Axis also has a bit bigger diameter of the boss in the middle as the motor has a bigger cutout in the top.

I printed them in PLA and just glued in the magnets with a bit of CA-glue.

They are very fun to watch.

Tagi