Battery Compartment Upgrade for Godin LGX-SA / LGXT / xtSA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you can change the battery without reaching for a screwdriver!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This item replaces the cover to the battery compartment in your Godin LGX-SA, LGXT-SA, or xtSA. Now you can change the battery without reaching for a screwdriver! I use a Dunlop battery door inserted into a cover 3D printed from PETG (more durable and heat-resistant than PLA). The prongs on the battery box should catch on the thinner part of the cover.
You will need to flip the STL model over for printing (the exterior surface should be against the print bed so it comes out smooth - this is done in the .3mf file). The screw holes are countersunk.
🇺🇸 💙 🇨🇦
If you found this model useful, please consider supporting my music at: https://echovocation.bandcamp.com