1 / 1
Dell 2nd Hard Drive Bracket Mount x662c — zdjęcie 1

Dell 2nd Hard Drive Bracket Mount x662c

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have a Dell Studio 1737 laptop. It's pretty old now, and it's hard to find parts for it. When I decided to upgrade…

Ocena
0 / 5
Polubienia
0
Pobrania
37
Wydruki
0
Wyświetlenia
349
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

I have a Dell Studio 1737 laptop. It's pretty old now, and it's hard to find parts for it. When I decided to upgrade to an SSD, I couldn't find a bracket mount for the secondary hard drive.

Last summer, I took all the measurements of the hard drive bay with calipers and got the standard hard drive measurements online. I didn't have a 3d printer at the time and I hesitated to order a print online in case the print didn't fit.

I got my Ender-3 V2 about a week ago, tuned it up as best I could and fired this off. The first print dimensions were very close and I got it in after a few minutes of sanding. I reduced the side thickness by 0.1 mm and increased the top thickness (with the holes) to make it a bit more sturdy. This morning, it came out very well, but it is a little tight.

That's probably more than you wanted to know about this print.

Good luck.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

20

Filament: Hatchbox PLA Rainbow Brown

Category: Computer

Tagi