Shark Stratos Vacuum Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got a Shark Stratos cordless vacuum from the MIL, it likes to get knocked over. Designed this wall bracket to hang it.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Got tired of the shark vacuum getting knocked over or laying on the floor (it doesnt fold anymore, the middle hinge broke- but that's a project for another day). I was about to design something to cradle the battery pack to hang it on the wall, when I realized it has a mount point on the dust canister body, so I modeled up this bracket to hang it with.
It works well, but needs to be made of a little stronger material than PLA since it will be bearing weight in a fairly small footprint. I printed mine in PETG and it's quite sturdy.
-Strong Material (PETG, ASA, ABS, etc)
-0.2mm layer height is fine
-Lay it on it's side and enable supports for the ideal print orientation
-I used 40% infill gyroidal
EDIT: added a variant with a wire hanger on the side as requested