Replacement Keys for Battat Toy Car Garage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I recreated the lost keys for the Battat Toy Car Garage
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Lost the keys to your Battat Car Garage? Here are some replacements I modeled.
I did not have the original keys. I made these from measuring the mating locks on the toy.
3D printers can vary a little. If the key is noticeably too large or small to fit in the lock, try scaling the print by ~1% in your slicer. This can also work to make the key handle press fit better into the back of the key.
If you want to make sure the handle can't come out of the key, you can heat stake it in once you've assembled it. Another option is a drop of a glue compatible with your plastic. I like SCIGRIP 16 Acrylic glue for PLA, but beware, this might not be a good solution if a child is going to put the keys in their mouth.