HB-47 Lens Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens hood for the Nikon 50mm 1.8 G and 50mm 1.4 G lenses
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a used lens and I couldn't find a model anywhere online of the lens hood for it, So I bought a cheap knockoff hood and spent the day modeling it.
The hood is reversable. It has the alignment dots on the outside to match up with the dots on the lens. I printed it with black matte PLA.
There are two built in supports for the chamfered edge where the relief cutouts are located. They come off easily enough with an xacto. I tried auto supports first and it didn't print well in that area.
I printed mine with seam position as random, outer brim, and normal supports enabled.