Derpy Tiger Halloween Candy Bucket (K-Pop Demon Hunters)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun, pumpkin-sized bucket based on the Derpy Tiger from K-Pop Demon Hunters - perfect for trick-or-treating.
- Ocena
- 2 / 5
- Polubienia
- 26
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
A fun, pumpkin-sized bucket based on the Derpy Tiger from K-Pop Demon Hunters. I printed three for my daughter and her friends, who are dressing up as Huntrix this Halloween. The handle also features inset logos from the movie for an extra touch of fandom flair.
The finished bucket measures 200 mm × 123 mm (≈ 7.9 in × 4.8 in) and weighs just over 300 g including the handle. The potential candy volume is a quite (un?)healthy 2 litres (approx - eyeballing it) so should be plenty spacious for your budding hunters to make their own sugar-based honmoon.
Most parts were printed in PETG for it's toughness and flexibility, although the walls should be plenty thick enough to still be strong in PLA. I definitely recommend printing the handle in PETG, though, as that little extra ‘give’ will help you get it through the holes without breaking anything.
- Stronghero Chrome Chameleon for the gradient version
- ERYONE HS Transparent Blue for the other two
- Handles in Flashforge Burnt Titanium
- Logo inserts in ERYONE Ultra Silk PLA Gold
Printed on a Bambu Lab P2S with a 0.6 mm High Flow nozzle, using the 0.24 mm Balanced Quality profile (with a few small tweaks). A single-colour bucket took just under 10 hours, needing only minimal supports with the 0.6 mm nozzle - though more supports may be needed if you’re on a 0.4 mm.
I considered a multi-colour AMS print for Derpy, but decided to skip it to save time and wastage (multiplied by 3!), so my daughter and I made it a little arts & crafts project and painted the details. No priming or messy spray paint, just some brushes and basic pots of Revell enamel paint (RGB + B&W), and we're pretty thrilled with the results!
I did use the AMS for the inset logos in the handle, but included a single-colour version where the logos are embossed instead.
Tiger head was chopped off, hollowed out and smoothed from the model by vantablack_k on Thingiverse (https://www.thingiverse.com/thing:7088667), published under Creative Commons license.