1 / 3
TrueLife NannyCam R3 Smart Holder — zdjęcie 1
1 / 3

TrueLife NannyCam R3 Smart Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TrueLife NannyCam R3 Smart Holder

Ocena
0 / 5
Polubienia
1
Pobrania
20
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial

I needed a holder for babysitting camera. 

Mount to bedframe profile 22,5 x 52 mm. For other mounting dimensions, part 3 and 4 need to be redesigned (if interested, you can PM me). 

For complete installation, you need:

  1. original mount supplied with the camera, 
  2. printed “Part 1”, 
  3. printed “Part 2", 
  4. printed “Part 3” and “Part 4”. 
    These parts need to be printed together (print in place)
    Preferred material is PETG (more springy, than PLA)
    Print support is needed. 
  5. One Allen key screw M6x15 and one M6x25 or longer, one M6 nut

Tagi