1 / 2
AEA Challenger Pro LB 29.5 Gen 2 .35 barrel band — zdjęcie 1
1 / 2

AEA Challenger Pro LB 29.5 Gen 2 .35 barrel band

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Barrel band , including rail for tripod or other stuff

Ocena
0 / 5
Polubienia
7
Pobrania
74
Wydruki
0
Wyświetlenia
279
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

AEA Challenger Pro LB 29.5 Gen 2 .35 barrel band

( Gen 2 , is external hammer spring setting, external regulator setting )

Barrelband for the PCP air rifle,  mine is a .35 ( 9mm ) but other calibre should fit.

Print it with PETG , sizes are exact, the picatinny works and is stable .

use 3x  m3 nut / boult to finish the clamp .

 

This should also fit on the 24 inch version , as long its a Gen 2 , ( 20mm barrel cover, 52mm tank )

 

Little trick, if you want to make a smaller version, just print it upside down on your printer, and lower it until you think “yeah, thats small enough” 

Rail might become useless tho ;p 

Tagi